|
Entertainment Lasers:
The technology for entertainment lasers has been thoroughly developed with green, blue and red lasers, the three primary colors, being used to make multicolored light shows.
Red lasers at multiple wavelengths:
635nm red lasers have powers of up to 1000mW. The beam quality of 635nm lasers is not as good as 532nm green lasers because the laser beam is produced directly by light from the laser diode without the use crystals. 635nm red lasers are roughly 3 times brighter than 671nm lasers of the same output power.
660nm or 650nm red lasers have powers of up to 1000mW and also have a laser beam produced directly by light from the laser diode.
671nm red lasers have powers of up to 4000mW and the same beam quality as green lasers.
Green Lasers at a single wavelength of 532nm
532nm green lasers have powers of up to 10 watts and higher. We provide different models at different power levels.
Blue lasers at two wavelengths
473nm blue lasers have powers of up to 800mW.
A laser show projector can combine several 473nm lasers to make a higher energy blue laser beam.
457nm blue lasers have powers from 1000mW to 7000mW. The prices for 457nm lasers are not low.
Modulation availability
Our normal lasers have a continuous wave (CW) normal working mode. TTL or analogue modulation can be built into lasers as required by customers to meet their needs.
The different modulation frequency levels available are >2kHz, >10kHz,
and 30kHz.
There is an additional cost to include modulation with the lasers.
Dragonlasers entertainment lasers are not limited to professional laser show professionals. Our entertainment lasers are also very popular with laser amateurs because of their low cost and high quality.
Some low prices lasers can be bought directly from our online shop.
Lab Lasers:
Ultra Low Noise Lasers: Almost all of our red lasers, green lasers and blue lasers can be built with ultra low noise. The noise of amplitude can be less than 1% and the coherent length can be longer than 1 meter.
Output power stability: With TEC cooling technology the output power of our lasers can be set at different levels to give control over the stability of the laser beam. The following stability levels are available <10%, <5%, <3% and <1%. Increasing stability will add to the cost of the laser.
Single longitude mode lasers: Our green lasers can be built with single mode both for transverse mode and longitude mode. The output power can be up to 300mW and one of the advantages of single longitude mode lasers is that the coherent length is longer than 50 meters.
Lasers at specific frequencies:
Diode Lasers: 808nm, 980nm, 1560nm
DPSS Lasers: 266nm, 355nm, 556nm, 593.5nm, 946nm,1064nm, 1342nm, 1047nm, 1053nm,1319nm
To know more about our OEM lasers and services, and to get a quote for our lasers, please
email us with all details of your laser requirements.
|
